CZ200/AA S200 set with 0,15L airtube

New

Set includes: a pressure regulator, quickfill with gauge, duralumin extended airtube ended with classic valve. So everything you need for immediately use is just screw airtube in airgun and you can start shooting without any additional installation or complicated disassembly.

In set is used vented regulator set at optimum pressure for this rifle (95-100bar) which will provide the maximum possible speed shots consistency and therefore the accuracy of the rifle. Altaros airtube has almost 3 times lower weight than original one, which is especially appreciated shooters who are trying to lighten the front of the gun.

Thanks to use of aluminum alloy and the black Anodizing treatment there is no risk of internal or external corrosion like with steel original airtube.
Quikcfill has ​​installed BAR gauge with scale 0-300bar. Airtube Maximum filling pressure is 190BAR.

You will save 30 euro on this set, plus time and equipment needed for installation. Airtube simply screw in airgun and shoot

More details

205,00 €

- +

  • High precion of regulation

  • Unique technologic solution

  • You buy directly from the manufacturer

  • 2 years warranty

  • Free shipping all over the world

  • Reviews
  • More info about airtube
  • More info about regulator
  • More info about quickfill

No customer comments for the moment. Login

Write a review

CZ200/AA S200 set with 0,15L airtube

CZ200/AA S200 set with 0,15L airtube

Set includes: a pressure regulator, quickfill with gauge, duralumin extended airtube ended with classic valve. So everything you need for immediately use is just screw airtube in airgun and you can start shooting without any additional installation or complicated disassembly.

In set is used vented regulator set at optimum pressure for this rifle (95-100bar) which will provide the maximum possible speed shots consistency and therefore the accuracy of the rifle. Altaros airtube has almost 3 times lower weight than original one, which is especially appreciated shooters who are trying to lighten the front of the gun.

Thanks to use of aluminum alloy and the black Anodizing treatment there is no risk of internal or external corrosion like with steel original airtube.
Quikcfill has ​​installed BAR gauge with scale 0-300bar. Airtube Maximum filling pressure is 190BAR.

You will save 30 euro on this set, plus time and equipment needed for installation. Airtube simply screw in airgun and shoot

Write a review

Total weight of Altaros airtube with installed regulator and quickfill with manometer.

Total weight of Original airtube with original brass cap and installed regulator inside.

Altaros airtube has compatible fitting design, same as the original CZUB airtubes supplied with airgun. Which is same thread M25x1 and therefore can use the original airtube plugs and accessories offered by us for this airgun. Altaros airtubes are available in two length versions, which have the same length as both variants of the original airtubes from CZUB. Thanks to the use of strength duralumin material has Altaros airtube versus original CZUB almost 3 times lower weight, which is especially useful for shooters who are trying to lighten the front of the gun. Thanks to the use of duralumin (an aluminum alloy) and black anodized surface treatment there is no risk of internal or external corrosion like with the steel original airtube.

Offered Airtube options and their comparison with the original steel airtube:

CZ200/AA S200 airtube with volume 0,15L ( 150 cc )

Original length of rod housing 38 cm ( marked the total length of 41 cm according to producer) weight 479 gram

Altaros length of rod housing 38 cm (same like original ) weight 167 gram

__________________________

CZ200/AA S200 airtube with volume 0,12L ( 120 cc )

Original length of rod housing 31 cm ( marked the total length of 34 cm according to producer) weight 385 gram

Altaros length of rod housing 31 cm (same like original ) weight 136 gram

 

 

With our accessories can be used both long and short airtube without being limited for attaching end terminal option on the barrel ( compensator / silencer ).

 Max fill pressure is 190 bar / 2750 PSI

More info can be found Here

Cz 200 regulator

Regulator used in our CZ200 duralium airtube is vented ( venting hole which is connected with atmosphere) . Installation is same like with all others vented regulator. Regulator is pushed inside airtube ( narrow silver part first) in such depth that you can see half of inner thread in airtube. Then remove o-ring from valve and screw valve back in airtube. By screwing valve in airtube you will pushing regulator deeper in right position. Do not screw valve fully in, keep small distance between airtube and valve around 0,1-0,3 mm. By this you create venting hole for springs.

First time fill airtube outside of airgun through quickfill, after filling screw airtube in airgun. Never fill airtube with mounted regulator through airtube valve. Filling old way through valve can damage regulator and other components!

JSB heavy 4.5mm 0.67g (0.177)

Average 225,7ms
Min 224,2ms
Max 226,9ms
Difference 2,7ms
Shots 77
Power 16,9J

CZ200 results with Altaros regulator 16J

Quick Fill is a device that replaces the original air tube plug. This quick fill has both gauge and filling hole for pin and there is no need for air tube to be unscrewed from airrifle body . In addition to greater comfort in the filling quick fill particularly useful when installing the regulator, since then no longer fill through regulator which eliminates the need for each fill fire several shots before the chamber pressure regulator drops in regulated value.

New quick fill plug is longer compared to the original brass plug, by only 4mm, there is no need to worry about the problem of mounting adapters at the end of the barrel. Filling is possible from both sides, so that it is always available at least one side of the filling hole at any angle air tube to the barrel.  It is therefore not necessary to indicate the position of the air tube before mounting.

With quickfill is delivered also filling pin with adapter, that can be screwed onto the hose with threaded G 1/8 internal or external, depending on whether or not to apply reduction the filling pin.

More info about quickfill can be found here

Product options note

These data is only information for us, not mandatory values. For example, if your rifle is currently set on 16J, then you can not with regulator expects higher energy than 16J. The regulator can never increase energy!

For more information, please read FAQ section or contact us by e-mail.

Output pressure we set according to requirements the power rifle with the regulator. If you want a specific output pressure so indicate that in notes for orders.

If you do not know any product options, or you are unsure so please state this in the notes for orders.