Altaros Compressor Booster Unit

New

Altaros compressor booster unit was developed and tested since 2011. Final version is tested over 2 years on much bigger workload than on what is invented, because we are using it daily for filling our airtanks on 300 bars. 

Our Altaros compressor booster unit  was designed for long service life while only minimum maintenance and service is needed. 

For more info about Booster Unit read Bassic Info.

Filling time depends on the output of driving compressore, more info in Performance.

Compressor can not be put in basket, you can order compressore booster unit by email, more info in How to order.

More details

555,00 €

  • High precion of regulation

  • Unique technologic solution

  • You buy directly from the manufacturer

  • 2 years warranty

  • Free shipping all over the world

  • Reviews
  • Bassic Info
  • Parameters
  • Performance
  • Instruction
  • Video
  • Warranty
  • How to order
  • Compressor model cut
  • Price

No customer comments for the moment. Login

Write a review

Altaros Compressor Booster Unit

Altaros Compressor Booster Unit

Altaros compressor booster unit was developed and tested since 2011. Final version is tested over 2 years on much bigger workload than on what is invented, because we are using it daily for filling our airtanks on 300 bars. 

Our Altaros compressor booster unit  was designed for long service life while only minimum maintenance and service is needed. 

For more info about Booster Unit read Bassic Info.

Filling time depends on the output of driving compressore, more info in Performance.

Compressor can not be put in basket, you can order compressore booster unit by email, more info in How to order.

Write a review

Driving compressor is needed:
We have developed compressor booster which operates on the principle of an amplifier input pressure to the desired output pressure 300bar (4500PSI). For these reasons, for our booster operation need to be connected to source of low pressure air, which is most often compressor with   low output pressure 6-10bar ie normal workshop compressor. If your low-pressure compressor is more powerful then our booster unit will work faster , resulting in faster performance of high-pressure air.
Long life is assured by slow moving  pressure cycle:
Due to the large volume of pistons our compressor is working with significantly lower speed (up to 20x times lower sliding velocity) at the same or greater amount of compressed air supply than what similarly low-speed high-pressure compressors on the market have.Thanks to this slow piston movement and much smaller length movement is seal much less stressed than on higher movement speed. At the same pressure air supply pistons in our compressor travels 10-15x   less distance than the high speed compressor, which also contributes to a further very long seal life.
The self-cooling ensures low operating temperatures and continuous operation :
The compressor booster has a built-in sophisticated cooling system of both cylinders using exhausted compressed air, which allows it to run uninterrupted, without causing excessive heating of the compressor.The surface temperature of the cylinders is approximately 40 ° C ( Max around 50°C ). Low operating temperature also contributes to even longer seal life.
Maintenance-free operation:
On the basis of the properties described above and due to the fact that the our compressor booster does not need lubrication, the compressor operates without the need for ongoing maintenance. In our long-term testing (2 years of daily use), it was found that the compressor without any lubrication or seal replacement managed fulfill around 200 bottles with capacity 4liters of a pressure from 200 to 300bar than was necessary maintenance service.
Compressor booster has automatic stop when required pressure in the bottle is reached:
Compressor booster includes an adjustable pressure switch which stops the compressor after reaching the desired outlet pressure. Setting the desired output pressure can be easily performed in a range 60-300bar (900 to 4500 PSI). When compressor reaching the required pressure automatic stop switch itself . In the case of a pressure drop in the Airtank ( for example   by cooling) automatic stop switch itself again refill airtank and then switch itself again to stop filling.
The two-stage separator moisture and multiple filtration:
Compressor basically contains cascade system moisture separator from the air, which provides very dry high pressure air   output from the compressor. Thanks to this, it is not necessary to worry about the penetration of moisture into the bottles, or pressure container. At the same time inlet air is filtered several times to remove impurities.
Easy seal replacement , spare seals set is included in compressor box :
The compressor is designed for easy dismantling, so if   is necessary to exchange any seal then overall time to exchange it should no take more than 15 minutes (the dismantling of the compressor - replacing seal – assembly compressor back). At the same time, most current seals on the compressor is already included in spare set supplied with the compressor. Specific seals can be ordered.
High pressure hose with multifunction valve:
Our compressor booster is ended with 0.5 meters long high pressure hose end with multifunction valve with bursting disc on   500Bar (7500PSI), venting screw and pin for paintball coupling. Burst disc is functional protection in the event of over pressurization device and prevents damage to bottling. After unscrewing paintball pin from multifunction valve is there present external thread G1 / 8 (1/8 BSP) on which it is possible to screw a female paintball quick or filling pins for airguns.
Low noise level:
Compressor booster works quietly and in the case of storing blocks of foam rubber to blow-off holes can be achieved even more significantly quieter operation.
Small size, light weight and practicality for carrying:
Compressor is covered in box which has dimensions of 30x30x60 cm and a weight of slightly over 5 kg. With this low weight and convenient handles it can easily be transferred or transported.
Protective outer box:
The outer plastic transport box provides excellent protection for compressor equipment itself not only against mechanical damage, but also against the outside impurity.
Medium pressure gauge for diagnosis :
The output of the medium-pressure cylinder is ended with medium pressure gauge. This manometer can be used for controlling process and size of medium- pressure in system, which can be very useful for rapid diagnosis of compressor status and for finding specific defects.
Setting air flow screw:
Compressor includes tuning setting screw to reduce air flow from driving compressor This allows adjust steplessly speed of compressor booster   and adjust air consumption for less powerful drive compressors so they can work in an effective pressure range.
Warranty: 2 years
Our compressors are supplied with 2 years warranty on mechanical parts or other defects. The guarantee does not apply to all seals. Details in the instruction.

Output pressure  Max 300bar, 30MPa, 4500 PSI
Input pressure Min 5bar, 70 PSI
  Max 10bar, 145PSI
Size (Height x width x depth) 30x30x60 cm
Weight 5 kg
Input voltage 100- 240 V AC
Output current 0,6 A
Input voltage (control unit) 12 V DC
Output current (control unit) 1 A

Altaros Compressor unit works on inlet pressure amplifiers principle. For these reasons it is necessary for its function source of pressurized air. As a source of compressed air may be used ordinary workshop compressor that provides at least 5 bar and a maximum of 10bar. Bottle filling speed depends on high pressure air and its amount supplied from the driving workshop compressor. For a better idea about the high pressure air filling speed we have prepared a table with real measurement for different types of workshop compressors, that differ in amount of supplied air quantity and volume of the outlet pressure and compressor load in %. This “Load” figure represents the ratio of time in%, when driving the compressor is in operation (For example 65% indicates that the compressor drive 65% of the time is in operation and 35% of its motor is stopped and pressurized air is consumed to drive only from the compressor air chamber). In the table are shown times for filling bottles of different sizes and pressures and also the amount of supplied air, in liters per minute, which is a value that can be used to calculate the time required for filling bottles of any size and the desired pressure difference. For illustration, here is an example:

Bottle which we want to fill has a capacity of 7 liters and the requirement to fulfill it from the pressure of 100bar to 300bar pressure.First, we calculate the total quantity of air required to fill the bottle by multiplying its air volume sizes of the differential pressures, namely 7 x L (300-100 bar) = 1400L air at a pressure of 1 bar (atmospheric pressure). This result is then divided by the data in the table. When using these data:

Compressor Drive: Load 65%    Supplied quantity: 11.4 L / min

We know that the driving compressor delivers 11.4 L / min

We can calculate final time that required volume is divided by “Supplied quantity“, therefore

1400L /11,4 L/min = 122 minutes. Thus Filling 7 litres cylinders (from 100 to 300 bar) to desired pressure, it should take about two hours when using this drive compressor.

When we use different driving compressor with different Supplied quantity 8,8L/min then our filling time would be 1400L / 8,8L/min = 160min  

This way you can calculate the approximate filling time for different air volumes, pressure differences and different driving compressors.

compressor

Driving compressor: Schneider Bohemia: UNM 410-10-50 W
Input power 2,2kW / 3HP
2 cylinders
Max pressure. 10 bar
Air intake 410 l/min     
Filling amount 295 l/min   
Realistically measured amount of airflow 350 l/min

Driving compressor Supplied quantity Filling time for different airvolume and different pressure
4l,  200-300bar 0,8l z 100-200bar 0,3l , 1000-3000PSI
Load 100% 16l/min 25min 6.5min 3,75min
Load 65% 11,4l/min 35min 8,5min 4,5min

 

 

Driving compressor: Hecht 2351
Input power 2,2kW / 3HP
2 cylinders
Max pressure 8 bar
Air intake 400 l/min     
Realistically measured amount of airflow 250 l/min

     

Driving compressor Supplied quantity Filling time for different airvolume and different pressure
4l,  200-300bar 0,8l z 100-200bar 0,3l , 1000-3000PSI
Load 100% 8,8l/min 45min 11min 5,7min
Load 65% 5,3l/min 75min 15min 8 min

                                                                           

 

 

 

Driving compressor:   Scheppach HC 24
Input power 1,5 kW / 2 HP
1 cylinder
Max pressure 8 bar
Air intake 220 l/min
Realistically measured amount of airflow 125l/min   


 

Driving compressor Supplied quantity Filling time for different airvolume and different pressure
4l,  200-300bar 0,8l z 100-200bar 0,3l , 1000-3000PSI
Load 100% 4,5l/min 90min 19min 9,5min
Load 65% 2,7l/min 150min 30min 15,5min

                                                        

 

 

 

 

 

 

 

 

 

 

You can downolad Compressor instruction here : 

Altaros compressor booster unit

Altaros Compressor booster in action:

Altaros Compressor Booster Unit Setting Output Presure:

Altaros Compressor Booste Unit Full test 7L:

Our compressors are supplied with 2 years warranty on mechanical parts or other defects. The guarantee does not apply to all seals. Details in the instruction.

Altaros Compressor can be ordered on email address Compressor@altaros.cz .

In order email, please provide the following information:

The required pressure when the regulator turn compressor off (You can change this pressure later by yourself).

Your preferred payment method : 

- PayPal

- Bank account

The required transport method  (only for customers outside the EU):    

- Czech Post

- EMS

- TNT

Address where should be compressor booster delivered:

Billing address (if different from shipping address)

After we receive your order our office will send you information about the transport cost and the total final price.

At the same time we will send you the information required to complete the payment.

Satisfaction guaranteed or your money back:

The buyer has the right to withdraw from the contract within 14 days of receipt of goods. In these 14 days, the customer can test the compressor.
More info in Terms and condition in point 6.

This compressor booster unit can not be bought directly on our E-shop, but you can order it from our company

Altaros Air Solutions s.r.o. on email Compressor@altaros.cz .

Price include VAT is € 555    /    620 USD  (for customer in the European Union )

Price without VAT is € 460    /    514 USD  (for customer outside the European Union, for example USA, Asia, South America, Africa,    VAT is not used there )

VAT = Value Added Tax it is consumption tax in Europe, Japan and other countries .

For example in Canada it is called: goods and services tax = GST .

The transport cost is individual.

In European countryies is shipping cost between 25-55 euro .

Here is few others countries:

Countries Czech post priorite airmail EMS
USA 79 euro 98 euro
Indonesie 98 euro 98 euro
Australie 98 euro 151 euro
JAR 91 euro 97 euro
Brazil 92 euro 121 euro

Countries Czech post priorite airmail EMS
USA 89 USD 110 USD
Indonesie 110 USD 110 USD
Australie 110 USD 170 USD
JAR 102 USD 110 USD
Brazil 103 USD 136 USD

Product options note

These data is only information for us, not mandatory values. For example, if your rifle is currently set on 16J, then you can not with regulator expects higher energy than 16J. The regulator can never increase energy!

For more information, please read FAQ section or contact us by e-mail.

Output pressure we set according to requirements the power rifle with the regulator. If you want a specific output pressure so indicate that in notes for orders.

If you do not know any product options, or you are unsure so please state this in the notes for orders.