Gunpower/ AirForce regulator for paintball bottle

The Airgun Regulator is the same as regulator (with thread 18x 1,5 mm on valve) for rifles gunpower (AirForce Condore), Fx Royale 400 (FX Boss), Daystate air range, Edgar Brothers EB XVi, only difference is that this regulator can be mount in paintball bottle with thread 5/8 x (18UNF). It is a simple installation without adjustments on the rifle, so everything can be returned back. All you need to do is screw regulator between the bottle and airgun body. Regulator is vented to atmosphere. We are not selling Paintball botlles, only regulators! After installing the regulator NEVER fill by quick fill on the airgun, only by quick fill on regulator. For the filling, you must purchase paintball coupling, which is the same as gun marauder or more. Do not use a pin as a lever for tightening regulator. For that is added screw-in spare o-rings.

Installation is the same as with a normal air tank. Just use our o-rings on regulator, because original o-ring on paintball bottle is too thick and if you put it on regulator (part which is screwed in paintball bottle) manometer will not show you pressure.

Internal parts, regulation system is the same as with normal vented regulator, so results/ number of shots will depend on Paintball bottle size/max pressure etc. You can check results with original bottle on our web.

Videos for installation and proper use regulator in the airgun Gunpower/ AirForce regulator for paintball bottle

Setting pressure of airgun regulator

Altaros regulator output pressure can be set from 100bar (1450 PSI) to 150bar (2200 PSI) and after consultation of up to 170 bar (2500 PSI) which corresponds to the rotation of the screw behind value 150bar so that the line of the screw is pointing to the letter R. For a quick setting is on regulator engraved scale according to which the desired output pressure can be set. The total scale range of 100-150bar corresponds to approximately 2/3 turn Unscrewing, or screwing setting screw more than 1 turn may result in a malfunction of the regulation and scale will not show you regulated pressure. Groove on red marked half of setting plastic screw represents pointer which shows you currently set pressure on the scale. To change the pressure on regulator, just simply rotate the set screw with the flat screwdriver in the appropriate direction according to regulator scale.


Regulator pressure scale with three different settings


In this picture you will find an old scale (set at 100 bar), which we no longer sell.